Filter
Top Products
E-24 Pacemark 4410 Setup Guide
Right Tractor
1. Open the right tractor pin cover, place the paper holes over the pins
and close the cover.
2. Fine tune the position of the right tractor to center the holes in the
paper on the pins of both tractors, then push the lock lever back.
Finish Up
1. Make sure that the feed stack of paper is directly aligned (left-right)
with its entry point into the tractors: this will promote a smooth flow
of paper into the printer.
2. Close the front access door.
3. Press FF/LOAD to load the paper into the print path.