Filter
Top Products
E-32 Pacemark 4410 Setup Guide
Rolling ASCII Test
To print a Rolling ASCII test:
1. Make sure that continuous form paper at least 9 inches wide is
loaded and that the printer is turned off.
Caution! If you have 9-inch paper loaded, be sure that the
Page Width menu setting for the paper path you are using
is changed from 13.6 inches to 8 inches before starting the
Rolling ASCII test. If you don’t, the printhead could be
damaged.
2. Press and hold PATH/TOF (1) while turning the printer on.
To stop the test, press ON-LINE/RESET.
1