Filter
Top Products
– 19 –
4-2. Thermal Label Paper Roll (Tack Label Paper)
(1) Label paper specication
Backing paper width: 110±0.5 mm
Outer roll diameter: ø100 mm or less
Take up paper roll width: 112
+0.3
-1
mm
Thickness: Max. 150 μm
Core outer/inner diameter: core inner diameter ø25.4±1 mm/core outer diameter
ø32±1 mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the paper roll or its
core.
Do not fold the tail end of the paper.
(2) Recommended label paper
Manufacturer
Product
name
Quality
features/
applications
Thickness (μm)
Adhesion
type
Base
material
Separa-
tor
Total
thickness
Nippon Paper
Industries
HD75 For FA and industry 78 60 114 High
adhesion
Ojitec Co.,
Ltd.
GS75 /
P22 / G6W
For distribution or
information control
61 41 115 High
adhesion
Lintec LD2114 For distribution or
information control
65 41 115 High
adhesion
Lintec LD3330 For distribution or
information control
85 60 150 High
adhesion
Note:
1) Depending on the type and thickness of the paper, it may be necessary to change the
settings for printing darkness. To change the darkness settings, use the printing dark-
ness settings command <ESC><RS> ‘d’ n. Refer to the separate programmer’s manual
for details.
2) The print density may vary depending on the type of paper roll and operating environ-
ment.
3) A reader or scanner may not be able to scan a printed bar code or characters depending
on the print density. Make sure that your reader or scanner is able to scan correctly
beforehand.
(3) Effective Print Width
Paper Width
(mm)
Right / Left Margin (mm) Effective Print Width
(mm)
Number of Print Columns
(12 × 24 Font)
105 ± 0.5 5 95 63