Filter
Top Products
APPENDIX D – SETTING UP > 68
INSTALLING THE ADF
1.
Remove the standard Scancopier document cover (1) by
opening the cover and lifting the studs (2) from the hinge
holes at the rear of the S900.
Store the document cover on a flat surface in a safe place.
CAUTION!
In some countries the ADF is an optional accessory. As such, it can be
installed at a later time. If the Scancopier has been used previously, be
sure to switch everything off and disconnect AC power from the
Scancopier before installing the ADF.
2
2
1