Filter
Top Products
Troubleshooting
6-4 OPERATION GUIDE
Insert Cassette1. The paper feeder was selected, but cassette 1 is not
installed properly.
Push the upper cassette securely into the machine.
—
Insufficient memory.
Unable to start job.
Memory shortage occurred during processing of other
jobs.
—
KPDL error.
Job is canceled.
####
Current print processing cannot continue.
If you want to cancel printing, press right Select. If Auto
Error Clear is set to On, printing will be automatically
resumed after a preset period of time.
Advanced
Operation
Guide
Load paper in Cassette1.
Size # Type #
Load paper in Cassette2.
Size # Type #
Load paper in
MP Tray.
Size # Type #
There is no paper in the indicated cassette. Press right
Select.
If you have loaded paper in the cassette, select Print
(Continue) and press Enter.
To switch to another paper feed location, select Paper
select and press Enter.
The available paper feed locations will be displayed.
Select the desired paper feed location and press Enter.
page 2-1
Memory overflow.
Part of the job end is printed.
The machine’s memory is full. Press left Select to cancel
the copying procedure. Pressing right Select after a part
of the job being processed is printed will end the job.
Insert fewer originals and try to copy again.
To add expansion memory, contact your service
representative or authorized service center.
Advanced
Operation
Guide
Paper Jam at Cassette1.
Paper Jam at Cassette2.
Paper Jam at MP Tray.
Paper Jam at Document
Processor.
Paper Jam in Printer.
A paper jam has occurred. Press left Select to display
the online help messages and remove the jammed
paper.
page 6-7
Place original and press Start
key.
The machine will attempt to make copies from any
originals that remain uncopied.
Reposition the original on the platen or in the document
feed tray and try to copy again.
—
Print overrun.
This page isn't complete.
The data transferred to the machine was too complex to
print on a page.
To continue printing, press right Select. To cancel
printing, press left Select.
—
Remove original from
Document Processor.
This appears if there is a document in the document
processor when the power is turned on. It also appears
when the paper has jammed while being fed from the
document processor because of the way it was placed.
Remove all the document pages inside the document
processor, and set them again correctly.
page 6-10
Message Procedure Reference