Filter
Top Products
16
1
EN
Memory card/ Setting time and date
Memory card
If you set the time and date beforehand, the
information when the file is recorded is automatically
stored for each file. Setting the time and date
beforehand enables easier file management.
When you use the recorder for the first time
after purchasing it, or when the battery
has been inserted without the device being
used for a long time, the [ Set Time & Date ]
will appear.
However, when a Password has been set
as the device lock function ( ☞ P.29), the
recorder will go to the time and date set
screen after verification (unlocking).
Setting time and date
[Time & Date]
OK/MENU button
+ , − button
9 , 0 button
F1 , F2 , F3 button
Notes
• Inserting the card the wrong way or at an angle
could damage the contact area or cause the
card to jam.
• If the card is not inserted all the way into the
slot, data may not be written properly.
• When an unformatted card is inserted into the
card slot, the recorder will automatically display
the format menu options ( ☞ P.41).
• Use only cards formatted with the recorder
( ☞ P.41).
• Never remove the card while the recorder is
operating, as this may damage the data.
• After pushing the card inward to eject it, releasing
your finger too quickly may cause the card to be
ejected unexpectedly.
• This recorder uses a microSD card as internal
memory. The microSD card has been preloaded.
• The recorder may not properly recognize the card
even when that card is compatible with it.
• The processing performance reduces in a card
when you repeat writing and deleting. In this case,
format the card ( ☞ P.41).