Olympus DS-3500 Microcassette Recorder User Manual


 
29
3
EN
Device lock function
Access to the recorder can be restricted by using the
Device Lock function. Password authentication can
be safer for your data in case the recorder is lost.
The password can be set by using the ODMS
software ( P.43).
When the password has been registered, you will be
asked for it on start-up.
1 Use the + , , 9 or 0 buttons to
select a number.
2 Press the OK/MENU button to set a
number.
A [ ] will appear in the selected first digit and
the flashing cursor will move to the next one
over (to the right). Repeat steps 1 and 2 to
enter all four digits.
Pressing the ERASE button at any time will
erase the last entry and move the cursor to the
previous entry (to the left).
3 After all four digits have been entered,
press the F2 ( ENTER ) button.
If the 4 digit number entered matches the
registered password then the start-up
message will appear and the recorder will
start-up.
Authentication halt mode
If the password does not match after five
consecutive tries, the recorder will enter into
authentication halt mode for ten minutes.
After ten minutes the password history will
be deleted, and the recorder will return to the
password input screen.
Device lock function
The default password when using the ODMS
software to set the password for the first time
is “0000”.