Filter
Top Products
30
3
EN
Setting the Author ID and Work Type
Every file recorded on the recorder will include
the Author ID and Work Type as part of its header
information. To create multiple Author IDs and
Work Types on the recorder, use the bundled ODMS
software to create and upload a data list (list of
Author IDs and Work Types) to the recorder. For more
details, refer to the online help for ODMS software
( ☞ P.46).
By default the Author ID is set to “DS3500”.
Setting an Author ID
1 Turn ON the recorder.
• When [ Prompt for author ID at Power-on. ]
has been set through ODMS software ( ☞ P.43),
the registered Author ID list will appear.
2 Press the + or – button to select the
Author ID that you want to assign to the
recorder from the ID list.
3 Press the OK/MENU button to set the ID.
• When more than one Author ID exists/ is
registered on the recorder, the ID list will be
displayed.
Note
• Up to 10 Author ID entries can be registered (up to
a maximum of 16 characters).
Setting the Work Type
Up to 20 Work Types can be registered and uploaded
to the recorder using the ODMS software. Each Work
Type can have up to 10 optional items associated
with it. Work Types and Optional Items can be
used on the recorder to populate the file header
information. Refer to the ODMS software online help
for registering/setting up Optional Items through the
ODMS software ( ☞ P.46).
The Work Type information of the recorded or
uploaded files can be edited with the menu settings
of the recorder ( ☞ P.39).
1 While the recorder is in stop mode,
press the NEW button.
• When [ Prompt for Worktype ID on new
recordings. ] has been set through ODMS
software ( ☞ P.43), the Work Types uploaded to
the recorder will appear in a list.
2 Press the + or – button to select a Work
Type from the Work Type list.
3 Press the OK/MENU button to set the
Work Type.
• The selected Work Type and a maximum of
20 Optional Items associated to it can be
recorded as file header information.
• It is possible to add an extra Value to the
Optional Items list of the selected Work
Type. In order to do so, go to the Work Type
information screen ( ☞ P.39). For more details,
refer to the online help for ODMS software
( ☞ P.46).
Setting the Author ID and Work Type