Filter
Top Products
16
1
Charging Battery Pack
Charging Battery Pack
Charge the Ni-MH Rechargeable
Battery Pack using the Cradle
The Ni-MH Rechargeable Battery Pack in the
recorder can be charged by connecting the AC
adapter or USB cable to the cradle with the
recorder set in it.
Charging using Cradle and AC Adapter
Connect the AC adapter to the cradle.
For connection procedures, see P.61.
When using the AC adapter for charging, connect the
power plug to the cradle AC connector (☞ P.19).
Firmly press the recorder all the way into
the cradle as shown in the illustration.
CHARGE indicator light glows red and the charging
starts.
The light goes out when the charging is complete.
You can charge the Ni-MH Rechargeable
Battery Pack in the recorder using the cradle
in combination with the USB cable or AC
Adapter. Or by directly connecting the AC
Adapter or USB cable to the recorder.
Battery pack need to be fully charged before
first use.
Full charge time: Approximately 3 hours.
CHARGE indicator light
Charging using Cradle and USB Cable
Connect the USB cable to the cradle.
For connection procedures, see P.61.
Turn the recorder’s POWER switch OFF
(☞ P.20) and firmly press the recorder all
the way into the cradle as shown in the
illustration.
CHARGE indicator light glows red and the charging
starts.
The light goes out when the charging is complete.
When the recorder is connected to a USB cable while
its POWER switch is turned OFF, only charging will
be performed, and the computer will not recognize it
as a drive.