Filter
Top Products
21
1
Inserting and Ejecting a SD card
Inserting and Ejecting a SD card
Inserting a SD card
Insert the SD card into the card slot in the
direction shown in the illustration until it
clicks.
This recorder uses a microSD card as its built-
in memory. The microSD card has been
preloaded. Refer to P.51 when removing or
inserting the card during emergencies.
When Inserting a Card
The recorder message [Please Wait] on the
display flashes for seconds.
Inserting an unselected card when the card
selected via [Card Select] is not loaded will
switch the recording destination to the
unselected card. Inserting the selected card
will revert the recording destination back.
SD Card
Selected
SD
Notes
• Insert the card keeping it straight.
• The card stops with a click when it is inserted all
the way.
• Inserting the card the wrong way or at an angle
could damage the contact area or cause the card
to jam.
• If the card is not inserted all the way, data may not
be written to the card.
• Hold the card straight and pull it out.
• If a unformatted card is installed, the recorder will
automatically display the menu format option (☞ P.52).
• Never use any card in the recorder unless it has been
formatted on this unit (☞ P.52).
• Never remove the card while the recorder is in
operation. This may damage the data.
• Releasing your finger quickly after pushing the card
inward may cause it to eject forcefully out of the slot.
Ejecting a SD card
Push the SD card inward once to unlock it,
and let it eject.
When Ejecting a Card
When a card selected through the [Card
Select] is ejected, the recording destination will
change over to the other card.