Olympus DS-50 Microcassette Recorder User Manual


 
18
1
1
Press the + or button in the menu
screen, and select the Time&Date.
See P91, 93 regarding the menu.
2
Press the OK or 9 button.
The Time/Date screen appears. The hour
indicator flashes, indicating the start of the
Time/Date setup process.The following steps
are the same as Step 1 through Step 3 of
Setting Time/Date (P17).
3
Press the STOP button to close the
menu.
3
Press the OK button to complete the setup screen.
The clock will start from the set date and time. Press the OK
button according to the time signal.
........................................................................................................
Notes
If you press the OK button during the setup operation, the recorder will
save the items that were set to that point.
After setup, a message will sound saying that If the guidance is not required,
select Off, and the screen goes into Voice Guide setup (P87). If you
don't want the guidance feature, select Off.
Setting Time/Date (Time&Date)
3
3
2
1
Changing the Time/Date
Press the STOP button while the recorder has stopped recording to check Time & Date and
Remain. If the Time & Date is not correct, set it using the procedure below.
Setting Time/Date