Filter
Top Products
57
6. Maintenance and inspection
Tighten the 2 screws.
Secure the connector by
the 3 supports on the
plate cover.
5. Insert a new battery into the UPS as far as it will go. ➀
● Replacement battery pack
For BU1002SW: Model BP100XS
Attach the plate cover.
Insert the lug at the bottom of the cover into the hole in the main body ➁ and push it towards the main body. ➂
Use a screwdriver to securely tighten (clockwise) the 2 screws you removed. √
Do not pinch the cable with the plate cover.
6. Insert the connector until it is locked. ➀
Secure the connector to the plate cover. ➁
You may hear a “pop” sound when you connect the battery if it is replaced
after the unit’s operation is stopped, but this sound is not abnormal.
If you cannot secure the connector to the plate cover, the connector is not
inserted completely.
Insert the connector again.