Omron CJ1W-ETN11 Network Card User Manual


 
167
FTP Server Application Example Section 7-4
7-4 FTP Server Application Example
The following procedure shows how to use the FTP server by connection with
the default login name, CONFIDENTIAL. No password is required.
Note The login name and a password must be set in the CPU Bus Setup for the
Ethernet Unit in the CPU Unit to use any login name other than CONFIDEN-
TIAL.
1,2,3... 1. Make sure that a Memory Card is inserted in the CPU Unit and turn ON
the power supply to the PC.
2. If EM File Memory is to be used, create the EM File Memory.
3. Connect to the FTP server from a computer on the Ethernet by entering
the text that is underlined in the following diagram.
4. Enter FTP commands (underlined in the following diagram) to read and
write files. The following directory tree is used in this example
Note 1. The current status of the FTP server can be obtained from the service sta-
tus in the words allocated to the Ethernet Unit in the CPU Bus Unit Area in
the CIO Area. The first word allocated to the Ethernet Unit is n and is com-
puted as follows: n = 1500 + (25 x unit number)
IP address of the Ethernet Unit
Results
Login name
File names read
Results
Change to MEMCARD directory
Results
Transfer DEF.IOM from ABC
directory
Results
/: root
EM
MEMCARD
ABC
DEF.IOM (file)
(subdirectory)