Filter
Top Products
Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner
Page 59
28. Selecting the Read Mode
Computer
Command
Function
/Description
Bar Code
Command
(ZZ)
START/END
Programming Menu
[[
S0
Single Read Mode
(Trigger enabled mode only)
T1
S1
Multiple Read Mode
T2
%
S2
Continuous Read Mode
T3
The operation of the scanner in the various read modes is described in the table below. The “Continuous
Read” mode is helpful in positioning the scanner for optimum reading. In “Continuous Read,” the
scanner’s buzzer functions like a Geiger counter, sounding the most active at the position achieving the
greatest number of good reads.
Mode Trigger Function Enabled (S8) Trigger Function Disabled (S7)
After receiving a trigger pulse,
scanner will read multiple,
different bar codes in succession
until it times out. (Each read will
reset the scanner’s time out)
Scanner will read different bar codes
in succession if they are presented
to the read window.
Multiple
Read
Scanner may not read the same
bar code twice if they are
consecutive. (See Sect. 32)
Scanner may not read the same bar
code twice if they are consecutive.
(See Sect. 32)
Continuous
Read
Scanner will read the same bar
code continuously after receiving
a trigger pulse until the label is
removed, the laser then times
out.
Scanner will read the same bar code
continuously.
Single
Read
Scanner will read only one bar
code after receiving a trigger
pulse. The scanner time out is
terminated on a good read and
the laser turns off.
Same as Multiple Read mode,
above.