Filter
Top Products
Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner
Page 64
34. Redundant Decoding
The Number of Redundant Decodes determines how many times the scanner must decode a bar code
and obtain the same value before it will transmit the data. For example, if the redundancy is set at three
times, the scanner will not transmit data until it has completed three consecutive, identical “good reads”.
In the case of a poor label which generates an intermediate “no decode” within a sequence of four scans
where three of the four have resulted in “good reads”, the scanner will transmit the data after the fourth
scan. In other words, a “no decode” does not restart the sequence.
Computer
Command
Function
/Description
Bar Code
Command
(ZZ)
START/END
Programming Menu
[[
X0
Read bar code once
Y1
X1
Read bar code twice
Y2
X2
Read bar code three times
Y3
%
X3
Read bar code four times
Y!
BS
Read bar code five times
CT
BT
Read bar code six times
CU
BU
Read bar code seven times
CV
BV
Read bar code eight times
CW
BW
Read bar code nine times
CX