Filter
Top Products
31
ABS / Air Bag 2004 User Guide Chapter 4: Custom Datastream
4: Custom Datastream
The Custom Datastream function lets you select
specific data items to display on the standard
Datastream screen.
To use the custom datastream function, follow these
steps:
1 Follow the instructions in “Chapter 2:
Start-up Steps” on
page 13
to display the Diagnostic Menu screen.
Figure 4.1: Diagnostic Menu Screen
1 From the Diagnostic Menu screen, select Custom
Datastream and press the ENTER key. This displays the
Custom Datastream selection screen.
Figure 4.2: Custom Datastream Selection Screen - before selections
2 Select the data items to include in the Datastream display
as follows:
a Use the Up and Down Direction key to select an item
to include in the display.
b Press the ENTER key. A check mark appears in the
box on the left side of the item.
Figure 4.3: Custom Datastream Selection Screen - after selections
c Repeat a and b for each item to include in the display.
Note: To deselect an item, select the item again and
press the ENTER key. Optionally, use the Select All and
Clear All function keys to select or deselect all of the items
at once.
3 When finished selecting data items, press the View Data
function key to display the selected items on the
Datastream screen.
Figure 4.4: Datastream Screen
4 For details about the Datastream screen, refer to “Chap-
ter 3: Datastream” on page 19.