Filter
Top Products
66
Special Test Screen Examples
ABS / Air Bag 2004 User Guide
Basic Multiple Component Control Screen
The following screen is the basic manual control screen
for multiple components. This screen allows control of
more than one component and has a More function key
menu for performing additional functions. You select a
component and then press the Start function key to
begin. You then use the On and Off function keys to
control the selected component.
Figure 10.5: Multiple Component Control Screen Example
Item 1 This area displays the command you have issued
through the scan tool (On, Off).
Item 2 This area displays the list of components you can
control along with the state of each component being
read by the ECU.
Item 3 The status line displays the current status of the test.
Item 4 The function keys let you manually control the
component as necessary. Compare what is
commanded by the NGIS tool to the state of the
component being read by the ECU to the actual
physical state of the component.
Item 5 The More menu contains basic Datastream
functions. For details, refer to “Datastream
Functions” on page 20.
Solenoid, Relay Controls Screen
The following screen is the basic manual control screen
for a solenoid and enable relay. You press the Start
function key to begin (when you press Start, the key
name changes to Exit). You then use the Solenoid and
Relay function keys to control the components.
Figure 10.6: Solenoid, Relay Controls Screen Example
Item 1 This area displays the commands you have issued
through the scan tool (On, Off).
Item 2 This area displays the states of the components
being read by the ECU. The bottom of this area may
also contain special test instructions.
Item 3 The status line displays the current status of the test.
Item 4 The function keys let you manually control the
component as necessary. Compare what is
commanded by the NGIS tool to the state of the
component being read by the ECU to the actual
physical state of the component.
1
2
4
5
3
1
2
3
4