Filter
Top Products
WiSER2400.IP WiFi Radio
Specifications
Model
WiSER2400.IP
Standard
802.11 and 802.11b
Host Interface
RS232
Frequency
2.4GHz – 2.495GHz
RF Channels
11 channels (US, Canada), 13 channels (Europe), 14 channels
(Japan)
Transmission power
14dBm at antenna input typical
Receiver sensitivity
-80dBm @1e-5 BER typical
Antenna
Integrated dipole antenna with ~2dBi gain
Data Rate
11, 5.5, 2 or 1 Mbps fixed rate, or configured to automatic rate
selection
Modulation
CCK, Direct Sequence Spread Spectrum
Link Distance
~1200 ft in open space
Network Types
Support normal station to AP link in the infrastructure mode
Data Encryption
Support the standard 64-bit and the 128-bit WEP
Network Security
MAC-address-based access control
AC adapter
Output: 5V, 1A; Input: 100-120V, 50-60Hz, ~0.3A
Current consumption
<480mA (max. reached in transmit-mode)
LED Indicators
4: Power, Transmission, Receiving, Link
Operating
Temperature
-10°C – 50°C
Regulation
Compliance
FCC part 15,Class B
CE ( ETSI EN 300 328-1, ETSI EN 301 489-17)
IC (for Ubicom-based model)
2
Key Features
Plug & Play operation—
o No driver on the host device is required for radio operation
o Radio operation is independent of the operating system on the host equipment or device
(Windows 98/NT/2000/ME/XP, Linux, Unix, embedded, etc.), as long as an RS232 port is
properly supported
Supports 64-bit and 128-bit encryption for secured communication
Industry standard IEEE 802.11b-compliant wireless interface
11Mbps data rate and automatic selection of lower data rate (5.5, 2 and 1 Mbps) in degraded RF
environment
Integrated omni-directional-antenna to provide best tradeoff between link-quality and mobility
Microsoft-Windows-based configuration utility
Applications
Standard-compliant wireless networking for computers and equipment with an RS232 interface
Embedded devices, tools, instruments, equipment and appliances that can benefit from the re-
configurability of wireless link yet are unfriendly to the installation of device-drivers
o
o Control/monitor equipment where mobility is required
POS equipment for stores where re-configuration is frequent