Filter
Top Products
Status LED’s
Power on the WiSER2400 Radio, the LED’s on the front panel should exhibit the
following patterns:
LED Color Light Blinking Pattern Indication
ON RED Steady on Proper power is supplied
Steady on Unit linked to any wireless station RX GREEN
Steady blink Unit not linked to any unit
TX RED Flickering Unit transmitting RF signal
LINK YELLOW Steady on
Not in use
The WiSER2400.IP radio is configured as a client Station and cannot be
changed. As a station, one of the most useful diagnostic tools may be the green
RX LED: a blinking green RX LED indicates the absence of a useful
communication link.
Once the hardware is checked out to work properly with the intended host device
or equipment, the radio can be secured in the desire location by the pair of
Velcro pads supplied.
4
3-foot –P
RS232 Cable
Radio Power
A
n installation example where the
WiSER2400.IP is connected to an RS232
equipment (whiteboard)