Filter
Top Products
Chapter 2 - INSTALLATION OF WiSER2400.IP
Installation of WiSER2400.IP Hardware
Standard Hardware Items
1 WiSER2400.IP radio
1 3-foot RS232 –P cable
1 ac-dc power adapter
1 pair of Velcro mounting pads
Power
This radio connected to your equipment draws power from the provided AC-DC
power adapter that plugs into a wall outlet.
RS232 Connection
The WiSER2400.IP radio is shipped with one RS232 cable. This 3-foot cable is
intended for use with any RS232 equipment (whiteboard, instrument, etc.) and
has the specification listed below:
Option –P—terminates in a male DB-9 connector, no dc-power is available
from this cable
Connect the modular plug (which resembles an over-sized telephone plug) of the
RS232 cable to the modular jack (which resembles an over-sized telephone jack)
at the bottom panel of the WiSER2400 radio. Connect the DB-9 (9-pin, can be
female or male depending on the equipment) connector of the RS232 cable to
the RS232 port in the client equipment or computer.
3