Filter
Top Products
Packard Bell iPower GX Disassembly Manual
18
Inverter
You can complete this procedure with the LCD assembly connected to the notebook. To remove
the inverter, first remove the LCD bezel (see LCD Bezel on page 17), and then do the following:
1. Remove the screws securing the inverter board.
Fig. 37 Location of the inverter screws.
2. Lift the inverter from the LCD panel and turn it over.
Fig. 38 Removing the inverter.
3. Disconnect the cables from the headers on the inverter board.
Fig. 39 Disconnecting the inverter cables.
Webcam
You can complete this procedure with the LCD assembly connected to the notebook. To remove
the webcam, first remove the LCD bezel (see LCD Bezel on page 17), and then do the following:
1. Disconnect the cable from the header on the webcam module.
Fig. 40 Location of the webcam connector.
2. Remove the screws that secure the webcam.
Fig. 41 Location of the webcam module screws.