Filter
Top Products
Packard Bell iPower GX Disassembly Manual
25
1. Swing the black fingerprint reader connector clip upward, then lift the cable out of the
connector (see Fig. 56).
2. Remove the touchpad button board from the notebook.
Fig. 59 Removing the touchpad button board.
Fingerprint Reader
To remove the fingerprint reader, first remove the touchpad button board (see Touchpad Button
Board on page 24) and then perform the following steps:
1. Remove the fingerprint reader from the notebook.
Fig. 60 Removing the fingerprint reader.
Bluetooth
To remove the Bluetooth module, first remove the top cover (see Top Cover on page 21) and then
perform the following steps:
1. Lift the Bluetooth module out of the notebook.
Fig. 61 Detaching the Bluetooth module.