Filter
Top Products
Packard Bell iPower GX Disassembly Manual
4
Battery
Perform the following steps to remove the battery:
1. Make sure the power to the system is off.
2. Unplug the AC adapter and all power and signal cables from the system.
3. Turn the notebook upside down.
Note:
Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to
the exterior of the notebook.
4. Slide the battery lock/unlock latch into the unlock position.
Fig. 1 Releasing the battery.
5. Slide the battery release latch into the release position and slide the battery out of the unit.
Fig. 2 Removing the battery.
Memory
To remove the memory installed, first remove the battery (see Battery on page 4) and then perform
the following steps:
1. Loosen the screws securing the CPU bay cover (the screws cannot be removed).
Fig. 3 Location of the CPU bay cover screws.