1313131313
Packard Bell EasyNote MT Disassembly Manual
13
3. Remove the screws (three in each side) securing the hinges.
Fig. 19 Location LCD hinge screws.
Note:
In Fig. 19, some of the screws are partly covered by adhesive tape and/or cables.
4. Lift out the LCD assembly.
Speakers
To remove the speakers, first remove the top cover (see Top Cover
on page 10), and then perform
the following steps:
1. Remove the screws securing the speakers to the casing.
Fig. 20 Location speaker screws.
2. Clear the speaker cables: detach any adhesive tape securing the speaker cables to the
main board.