Filter
Top Products
66666
Packard Bell EasyNote MT Disassembly Manual
6
1. Remove the two screws securing the memory compartment cover.
Fig. 5 Removing memory compartment cover.
2. Lift the cover upwards from the right. There are three tabs holding the cover in place on the
left. Raise the cover until you can remove it from the casing (see Fig. 5).
3. Release the clip on each side securing the memory module; the module will eject upwards.
Fig. 6 Removing memory module.
4. Carefully remove the memory module from the socket.
Note:
In case two memory modules have been installed, you have to remove the top module first before you can
remove the one underneath.
Optical Disk Drive
To remove the optical disk drive, first remove the battery (see Battery
on page 4) and then perform
the following steps: