Filter
Top Products
1616161616
Packard Bell EasyNote MT Disassembly Manual
16
1. Remove the screws securing the brackets that hold the left and right speaker assembly.
Fig. 25 Location of speaker brackets screws.
2. Release the white clip securing the audio board cable and disconnect it from the header on
the main board.
Fig. 26 Location of audio board cable.
3. Remove the two screws securing the memory compartment cover (see Fig. 5
).
4. Lift the cover upwards from the right. There are three tabs holding the cover in place on the
left. Raise the cover until you can remove it from the casing (see Fig. 5).
5. Carefully disconnect the optional TV antenna cable.