Filter
Top Products
-10-
ON
OFF
• Shifting Cable Compensation Switch on Pan/tilt
Head
If the distance from the control panel to the pan/tilt
head is longer than 300 meters, set the cable compen-
sation switch to the ON position by observing the fol-
lowing procedure.
q Remove the controller connection panel from the
pan/tilt head.
* Be careful of the wires.
w Shift the cable compensation switch on the inner side
of the controller connection panel of the pan/tilt head to
the ON position.
e Place the controller connection panel back on the
pan/tilt head.