Filter
Top Products
-22-
5. Camera and Pan/tilt Head Presetting
1) Select a camera and pan/tilt head with the CONTROL
switch on the multi hybrid control panel.
2) Pick up a desired object with the camera using
PAN/TILT Lever ZOOM Lever and FOCUS Lever of the
multi hybrid control panel. Select a white balance con-
trol mode using AUTO/ATW ATW Switch AUTO/ATW A
Switch or AUTO/ATW B Switch. To store iris data in the
memory, set IRIS AUTO/MANU Switch to the MANU
position and turn the iris control. When IRIS
AUTO/MANU Switch is in the AUTO position, iris data
will not be stored in the memory.
3) Keep MEMORY Switch of the multi hybrid control panel
depressed (MEMORY Switch lights and all the 10 but-
tons of PRESET Switch flash), press any of the buttons
[1] to [10] of PRESET Switch as desired to store the
data in the memory. Only that button of PRESET
Switches where the data is stored lights.
Note: If data is stored again in the same button of
PRESET Switches of the multi hybrid control
panel the preceding data is deleted.
4) Repeat Steps q and e to store the presettings of all
the cameras and pan/tilt heads in the memory.
6. Various Switch Settings
Select a desired operating camera and pan/tilt head with
the CONTROL switch on the multi hybrid control panel,
then control the camera and pan/tilt headControl the cam-
era and pan/tilt head using PRESET Switch, PAN/TILT
Lever, ZOOM Lever, FOCUS Lever, IRIS AUTO/MANU
Switch and other switches.
* In case of not changing the adjustment data and set-
tings, it is not necessary to repeat the adjustment and
setting procedures described in Sections 2 to 5.