Filter
Top Products
-18-
GRAY
YELLOW
CYAN
GREEN
MAGENTA
RED
BLUE
100
90
80
70
60
50
40
30
20
10
0
-10
-20
-30
-40
+69
+77
+56
+48
+38
+12
+7
-5
-16 -16
+15
+28
+36
+20
-20
+20
-20
+100+100
+89
+77
+72
+46
IRE
75%
100%
1V[p-p]
+100
+27
+27
-20
-13-13
100
90
80
70
60
50
40
30
20
10
0
-10
-20
-30
-40
IRE
75%
100%
+20
-20
+20
-20
+7.5+7.5
− Ι WHITE +Q BLACK
1V[p-p]
Color Monitor
Color Monitor
Waveform Monitor
Waveform Monitor
• Genlock Adjustment
To use the camera in external sync mode, phase adjust-
ment is necessary to match the phases with those of the
other units and camera. No G/L adjustment is necessary in
case of no genlock.
• Horizontal Phase Adjustment
q Set G/L PHASE ON/OFF Switch of the multi hybrid con-
trol panel to the ON position.
Note: When G/L PHASE ON/OFF Switch of the multi
hybrid control panel is set to the ON position, the
sync phase of the camera changes to the settings
of G/L PHASE H Control, G/L PHASE Coarse
Switch, and G/L PHASE SC Control. Unless G/L
phase adjustment is necessary, do not set G/L
PHASE ON/OFF Switch to the ON position.
w Observe the waveforms of the G/L signal input (black
burst signal ) and video signal output on a dual chan-
nel oscilloscope, and turn the G/L horizontal phase
control to match the horizontal phase as shown in the
next page.