Filter
Top Products
25
Black level (master pedestal) adjustment
Black level (master pedestal) adjustment
The black level can be adjusted when using a multiple
number of cameras including the unit. Ask your dealer to
perform this adjustment.
(Use an oscilloscope or waveform monitor for the
adjustment.)
Adjust the black level in accordance with the units and
devices used.
The black level can be adjusted only when Manual1,
Manual2 or Manual3 is selected as the shooting mode
(scene file).
When performing the operations
using the wireless remote control
1 Press the [M/IRIS] button.
Set the iris to the manual mode.
2 Press the [IRIS –] button.
The lens iris is stopped down.
3 Select Manual1, Manual2 or Manual3 by
following the procedure in “How to select the
shooting mode” (page 10) under “Selecting the
shooting modes (scene files)”.
4 Press the [] or [] button to bring the cursor
to “Picture”.
5 Press the [] button.
The “Picture 1/2” sub‑menu is displayed.
Picture 1/2
Chroma Level 0
AWB Mode AWB A
Detail High
Flesh Tone Mode Off
Color Matrix EBU
DNR High
Return
6 Press the [] or [] button to move to the
“Picture 2/2” sub‑menu, and bring the cursor
to “Pedestal”.
Picture 2/2
Pedestal 0
DRS Off
Gamma Type Normal
Gamma Level Mid
Back Light COMP. Off
Return
7 Press the [] button to start the “Pedestal”
value blinking.
8 Press the [] or [] button, change the
“Pedestal” value, and press the [] button to
enter the selection.
Adjust the black level to a value of approx. 5 IRE
(0.035 V).
9 Press the [MENU] button for 2 seconds.
The menu display is exited.
10
If necessary, press the [A/IRIS] button to adjust
the iris automatically.