Filter
Top Products
15
Getting Started
8 Setup Windows
Power Switch
Power Indicator
7 Turn your computer on
Press the power switch and hold it for approximately
one second until the power indicator turns on before
releasing it.
Do not press the power switch and hold it for more than four seconds; this
will cause the power to be turned off forcibly.
Do not press the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
CAUTION
Do not press any key or move the mouse until [Windows XP Professional
Setup] is displayed.
CAUTION
1 At [Welcome to the Windows XP Setup Wizard], select [Next].
2 After reading the agreement, select [I accept this agreement] or [I don’t accept
this agreement], then select [Next].
NOTE
If [I don’t accept this agreement] is selected, the Windows setup will
be aborted.
3 Select settings for your region, then select [Next].
4 Enter your name and organization and then select [Next].
5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows can-
not be operated.
NOTE
The message showing an IP address conflict may be displayed before the
wireless display setting ( Step 9 on page 17) is finished. Close the mes-
sage and continue operation.