Filter
Top Products
20
Getting Started
First-time Operation
Depending on the Windows settings, installed applications, and drivers, menus and
other displays may differ, or some functions (such as use of the password reset disk)
may be inoperable.
You can select Classic view for the Control Panel or select the Classic Start menu.
The procedure in this manual uses the method or view of the Windows XP default
setting (not Classic view or Classic Start menu etc.).
You can change the way a user logs on or off in [Start] - [Control Panel] - [User
Accounts] - [Change the way users log on or off]. However, when using the wire-
less display, you cannot select [Hibernation] from the shut-down screen (
“Standby/Hibernation Functions”) if the Welcome screen is enabled.
To select [Hibernation] from the shut-down screen, delete the check mark for [Use
the Welcome screen].
Resetting the password
Windows XP has a function to reset a forgotten password.
To use this function, you need to create a password reset disk beforehand following
the steps below.
1 Connect the USB floppy disk drive (optional: CF-VFDU03) to your computer.
2 Select [Start] - [Control Panel] - [User Accounts].
3 Select [Prevent a forgotten password] from [Related Tasks] menu of the account
you have logged on to and create a password reset disk following the on-screen
instructions.
Store the password reset disk in a safe place.
· Only the logon password for each account can be reset.
The password set in the Setup Utility cannot be reset.
Information for Windows XP
CAUTION
Do not use the Fast User Switching function, as it is not supported.
Do not add the check mark for [Use Fast User Switching] in [Start] - [Control Panel]
- [User Accounts] - [Change the way users log on or off].