Filter
Top Products
12
Configuring the Touchscreen
When needed, the touchscreen can be configured using the following steps.
2 Make necessary changes
3 Select [OK]
For more information, click at the upper right corner.
The double-click speed of the touchscreen can be changed in [Tap and
Buttons].
Advanced configuration
Set the advanced settings.
Calibration & Test
Define the calibration setup. Use
this procedure when the cursor,
the stylus (included) and your fin-
ger touches do not appear to
agree. (Necessary for changes in
the alignment of the touchscreen
with visual images or an adjust-
ment of the display resolution.)
Touch the “+” mark on the calibra-
tion screen for about one second.
After the calibration procedure is
executed (e.g., after the nine “+”
marks are touched), the procedure
ends when Enter is pressed.
Test
Test for the “Double click settings”.
Double click settings
Set the width and height
of the double click.
NOTE
Touchscreen <Only for models with touchscreen>
1 Windows 2000
Select from the taskbar and then select [TouchScreen] or
select [TouchScreen] in [Control Panel] - [Mouse]
Windows XP
Select from the taskbar and then select [TouchScreen] or
select [TouchScreen] in [Control Panel] - [Printers and Other
Hardware] - [Mouse]
The following screen will appear.