35
Windows 2000
Refer to the Operating Instructions of the Second Hard Disk Drive Pack.
Windows XP
To format the second hard disk, perform the operation below.
1 Turn your computer on.
Be sure to log on with the administrator authority.
2 Select [Disk Management] in [Control Panel] - [Performance and Maintenance] -
[Administrative Tools] - [Computer Management] - [Storage].
3 When [Welcome to the Initialize and Convert Disk Wizard] is displayed, select
[Next].
4 At [Select Disks to Initialize], add the check mark for [Disk 1] and select [Next].
5 At [Select Disks to Convert], remove the check mark for [Disk 1] and then select
[Next].
6 Select [Finish].
7 Click the right side of [Disk 1] with the right button and select [New Partition].
Follow the on-screen instructions.
8 When the operation completes, be sure to select [Start] - [Turn off computer] and
restart the computer before using the second hard disk.
Information for the Second Hard Disk Drive
When changing the partition, the contents of a hard disk drive are completely
erased.
CAUTION
Windows 2000
Refer to the Operating Instructions of the Second Hard Disk Drive Pack.
Windows XP
The partition can be changed in [Control Panel]- [Performance and Maintenance] -
[Administrative Tools] - [Computer Management] - [Storage] - [Disk Management].
When changing the partition (after First Time Operation)
Multimedia Pocket