Filter
Top Products
51
Hard Disk Drive
To Change Your Hard Disk Drive, Contact Panasonic Technical Support
Inserting/Removing the Hard Disk Drive
1 Power off your computer ( "Starting Up/Shutting Down")
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor and remove the second battery pack if one
is inserted.
2 Remove the cover ( page 30)
3 Removing the hard disk drive
Slide the hooks of the hard disk drive toward the inside.
Pull the tab A and release the hard disk drive from the connector.
Pull the tab B up and gently lift the hard disk drive.
Inserting the hard disk drive
Insert the hard disk drive as shown in the figure.
Push the base part of the tab A and firmly connect the hard disk
drive to the connector.
Slide the hooks of the hard disk drive toward the outside.
Close the tab A.
4 Put the cover back into place ( page 31)
Tab A Tab B
Hook
Connector
To change your hard disk drive, contact Panasonic Technical Support.
Be sure to back up all important data before the change.
You can erase the data before changing the hard disk drive.
( “Hard Disk Data Erase Utility”)
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before the change.
Be careful when replacing the hard disk drive. The hard disk drive is extremely
sensitive to shock. In addition, static electricity could later affect some internal
components.
CAUTION