Filter
Top Products
18
Standby/Hibernation Functions
Standby Mode
or
Hibernation Mode
Rotate the power switch; at the “beep*” sound,
release your finger
(After releasing your finger from the
power switch, do not touch the power
switch until the power indicator goes off
or blinks.)
CAUTION
At the “beep*” sound, release your finger from the power switch. If you continue
to rotate the power switch and hold it for more than four seconds, the computer
will emit a second “beep*” and the power will be turned off forcibly. Data not
previously saved will be lost.
Windows 2000
Even when [When I press the power button on my computer] is set to [Power
Off] with [Control Panel] - [Power Options] - [Advanced], if you rotate the power
switch for more than four seconds and do not release it, a second “beep*” will
sound and the power will be turned off forcibly. Data not previously saved will be
lost.
Windows XP
Even when [When I press the power button on my computer] is set to [Shut
down] with [Control Panel] - [Performance and Maintenance] - [Power Options]
- [Advanced], if you rotate the power switch for more than four seconds and do
not release it, a second “beep*” will sound and the power will be turned off
forcibly. Data not previously saved will be lost.
* When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the
Setup Utility (
page 53) or by the key combination , there will be no beep
sound.
Fn + F4
Using the Power Switch
Setting
Windows 2000
1 Select [Start] - [Settings] - [Control Panel] - [Power Options].
2 In [Advanced], select [Standby] or [Hibernate] for [When I press the power button
on my computer] and then select [OK].
Windows XP
1 Select [Start] - [Control Panel] - [Performance and Maintenance] - [Power Op-
tions].
2 In [Advanced], select [Stand by] or [Hibernate] for [When I press the power button
on my computer], then select [OK].
Shutting Down