Filter
Top Products
56
Parameters
Setup Utility
Fn+F7/Fn+F10 Key: [Enable]
CD Drive Speed: [High]
Power Menu
( : Default)
Fn+F7/Fn+F10 Key
CD Drive Speed
Disable
Enable
High
Low
Boot Menu
Floppy Drive*
1
Hard Disk
CD Drive
LAN*
2
The default order is as follows:
[Floppy Drive] [Hard Disk] [CD Drive] [LAN]
To move a device up by one in the order, select the device with and ,and then press F6 .
To move a device down by one in the order, select the device with and ,and then press F5 .
NOTE
Boot First Menu
The device for starting up the operating system can also be selected during computer start-up.
After the computer is turned on, the device selection display will appear when Esc is
pressed while “Press Esc to enter Boot First Menu” is shown.
When the setting of the [Boot] menu is changed, the selection screen display will also change.
The [Boot Menu] is displayed only when [Display Boot Menu] in [Security] menu is set to
[Enable].
*
1
This item is shown even when the floppy disk drive is not installed
or [Floppy Operation] is set to [Disable].
*
2
This item is displayed only when [Boot up from LAN] in [Advanced]
menu is set to [Enable]. (
page 55)