Filter
Top Products
44
USB Device
USB Port
Inserting a USB Device
Removing a USB Device
CAUTION
Do not remove the USB device while your computer is in the standby or hiberna-
tion mode.
1 Windows 2000
Double-click on the taskbar and select the USB device, then
select [Stop]
Follow the on-screen instructions.
(When is not displayed or when the USB device has been removed after the
computer is turned off, this step is not necessary.)
Windows XP
Double-click on the taskbar and select the USB device, then
select [Stop]
Follow the on-screen instructions.
(When is not displayed or when the USB device has been removed after the
computer is turned off, this step is not necessary.)
2 Remove the USB device
USB devices may be attached or removed without turning off the
computer’s power.
When a USB device is connected, there are cases the standby or hiber-
nation function will not operate in a normal manner due to the USB de-
vice. In addition, a USB device may have to be removed temporarily and
the computer restarted in cases where the computer is unable to start
up properly.
Connect the USB device to your computer, referring to the
operating instructions of the USB device
You may need to install drivers compatible with the operating system you are
using for your USB devices. Follow the on-screen instructions and refer to
the operating instructions for USB devices on how to install the driver.
NOTE