Filter
Top Products
23
1 Turn your computer on
2 Press the disc eject button and slowly pull out the tray
3 Place the disc securely on the center holder
4 Close the tray
Setting a Disc
Title-side up
Do not apply excessive force to the tray in the open position, doing so could
damage the tray.
Center Holder
Eject Button
CAUTION
CD Drive
If the vibration of the CD drive is excessive, set the [CD Drive Speed] to [Low] in the
Setup Utility.
If the CD drive has not been accessed within 90 seconds, the drive motor will automati-
cally shut down to reduce the power consumption. When the CD drive is accessed
once again, the power of the drive motor is turned on. However, approximately 30
seconds are required until data is actually read from the disc.
Power-saving Mode
NOTE
To play DVD-Video or MPEG2 files, install the DVD playback software (included).
For information on how to install the software, refer to the manual of the software.
The region code has been set to the following:
<For U.S.A. and Canada> Set to “1”
<For Europe> Set to “2”
Use of another region code or alteration of the region code invalidates the warranty.
For more information, contact Panasonic Technical Support.
If commercially available DVD playback software asks you the region code, set to the
following:
<For U.S.A. and Canada> Set to “1”
<For Europe> Set to “2”
The playback of CDs containing moving pictures (Video CDs, CDs including MPEG
data, etc.) may not be smooth.
Information for the DVD-ROM Drive (Model with a DVD-ROM Drive)