Panasonic CF-48 Series Personal Computer User Manual


 
38
CAUTION
Hard Disk Drive
To change your hard disk drive, contact Panasonic Technical Support
To customers:
To change your hard disk, contact Panasonic Technical Support.
Be sure to back up all important data before the change.
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before the change.
To technicians (at Panasonic Technical Support):
Be careful when replacing the hard disk. The hard disk is extremely sensitive to
shock. In addition, static electricity could later affect some internal components.
3 Removing the hard disk
Carefully lift the hard disk and remove it from the connector by pulling
the tab.
1 Power off your computer ( “Starting Up/Shutting Down”)
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor and remove the battery pack.
2 Turn your computer over and remove the cover
Slide the latch, and then without releasing it, slide and remove the cover.
Cover
Hard Disk
CAUTION
Installing/Resuming the hard disk
(For technicians at Panasonic Technical Support)
Latch
4 Inserting the hard disk
Connect the hard disk to the connector and carefully insert the hard
disk.
The hard disk may be damaged if its top and bottom are confused.
CAUTION
5 Close the cover
Match the mark on the cover to the body of the computer and slide the
cover back into place.
Mark
Tab
Be sure the tab does not get caught when closing the cover.
Tab