Filter
Top Products
28
RAM module specifications
3 Installing the RAM module
Slide in the module at an angle.
Snap the module into place by pushing down on it.
Removing the RAM module
Open the left and right hooks.
Gently remove the RAM module from the slot.
4 Put the cover back into place
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such mod-
ules. In addition, it is easy to damage the RAM modules or internal components of
the computer. Therefore, when installing or removing a RAM module, handle the
module with extreme care.
Do not touch the terminals or internal components, insert objects
other than the module, or allow foreign particles to enter. Doing so
has been known to cause damage, fire or electric shock.
200 pins, SO-DIMM, DDR-SDRAM, PC2100 Compliant
RAM Module
1 Power off your computer ( "Starting Up/Shutting Down")
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor and remove the battery pack.
2 Remove the memory cover after removing the screw
holding it in place
Turn the computer over and use a screwdriver to remove the screw.
Memory Cover
RAM Module Slot
RAM Module
Use a RAM module meeting the RAM module specifications below. If a module is used
that does not meet the specifications, there are cases in which data may become unus-
able or the computer may not operate properly.
CAUTION
Installing/Removing the RAM Module
CAUTION
Only a RAM module designed for PC2100 can be added.
Hooks
NOTE
Whether the RAM module is properly recognized or not can be con-
firmed in [Main] of the Setup Utility. If the RAM module is not recognized,
power off the computer and reinstall it.