Filter
Top Products
50
Setup Utility
Enter the User Password or Supervisor Password. If you have forgotten it, contact
Panasonic Technical Support.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
[Enter Password] is dis-
played
[Advanced] menu can
not be registered
All or some items in [Se-
curity] menu can not be
registered
F9 does not work
Dealing with Problems (Advanced)
Unable to connect to a
network
Windows 2000
When performing a copy
operation via a LAN card
with a computer on the
network, an error mes-
sage is displayed and the
copy operation fails
The sound is not heard
When using the computer as a network computer, some additional settings may
have to be made depending on the usage conditions. We recommend asking your
system administrator or the person in charge of the network.
If the standby or hibernation mode is entered, the computer may have to be re-
started.
The settings for the LAN card you are using may not be optimized. Confirm this
with the following procedure.
1 Double-click the Network Card you are using from [Network adapters] in [Con-
trol Panel] - [System] - [Hardware] - [Device Manager].
2 Select [Advanced], select [Store And Forward] from [Property], then set [En-
abled] for [Value] if it is set to [Disabled].
(This item may be unavailable for some types of network cards.)
Confirm that the computer on the network is operating properly and that the file is
not corrupt.
Network
Try changing the mute by pressing Fn + F4 or Fn + F6 .
Has the Setup Utility been used to set [Speaker] to [Enable]?( page 40)
Sound
[Fn] key combinations do
not work
When switching to a different user with the Fast User Switching function, these key
operations may not work. If this is the case, log off, then log on again and try the
operation once more.
Key Combinations