Panasonic DP-1810P Scanner User Manual


 
28
Function
General Functions for Key Operator
No. Modes
Initial
Setting
Function
NOTE
Selects the Control Panel reset time.
COFF, 30 sec, 1 min., 2 min., 3 min.,
4 min.
Selects the message language of the display.
CA-ENGLISH, C-FRENCH, SPANISH
AUTO RESET TIME
LANGUAGE DEFAULT
05
Sets the paper tray for special paper (ex: colored).
CNONE, TRAY 1, TRAY 2, BYPASS
SPECIAL TRAY 1
NONE
Sets the Energy Saver mode and time.
CINVALID, ENERGY-SAVER, SLEEP
Energy save mode timer : 1-120 minutes
Sleep mode timer : 1-120 minutes
ENERGY SAVER MODE
1 min.
SLEEP
A-ENGLISH
KEY/TOUCH BEEP
Sets the panel touch sound.
COFF, SOFT, LOUD
SOFT
01
02
04
09
Consult
your
service
technician.
Monitors copy usage of each department.
(1) TOTAL COUNTER
(2) DEPT. COUNTER
(3) DEPT. COUNTER LIST
DEPT. COUNTER MODE
Sets the IP Address assigned to your machine.
C3 digit × 4 (Use the MEMORY IN key to
enter the "." between each set of 3-digit
numbers)
TCP/IP ADDRESS
Sets the Subnet Mask.
C3 digit × 4 (Use the MEMORY IN key to
enter the "." between each set of 3-digit
numbers)
TCP/IP SUBNET MSK
Sets the Subnet Mask.
C3 digit × 4 (Use the MEMORY IN key to
enter the "." between each set of 3-digit
numbers)
TCP/IP G/W ADDR.
14
22
23
24
CIt is necessary to input the Key Operator ID code before changing items on
this page.
CThe Special Tray 1 and 2 are not auto-selectable in the switching mode.
Not available for plain copier, but will be available when installing options
for advanced functions. (See page 50)
Sets the paper tray for special paper.
CNONE, TRAY 1, TRAY 2, BYPASS
SPECIAL TRAY 2 NONE
06
Sets the sound when put paper(s) on bypass
tray.
C1: INVALID 2: VALID
BYPASS SET BEEP INVALID10
Sets the sound when put paper(s) on ADF.
C1: INVALID 2: VALID
ORIG.SET BEEP ADF VALID
11
Prints list containg Current Setting and
Standard Setting.
COPY SETTING LIST
25
Contact
your
Network
Adminstrator.
Contact
your
Network
Adminstrator.
Contact
your
Network
Adminstrator.