Filter
Top Products
197
Chapter 8 Reading Reports/Lists
Items that are covered in the communication journal are listed below.
No. Item Explanation
(1) Indication of
communication mode
Indication of communication mode
(2) Start time of
communication
Start time of communication
(3) End time of
communication
End time of communication
(4) File number 001 to 999 (When the communication is stored into the memory, a file
number is assigned for each communication.)
(5) Station number Sequential number of the stations
************* -Comm. Journal- ***************** Date dd-MMM-yyyy ** Time 15:00 ********
(1) (2) (3)
Mode= Memory Transmission Start = dd-MMM 14:50 End = dd-MMM 15:00
File No.= 050 (4)
(5) (6) (7) (8) (9) (10)
STN
Comm. Key Name Station Name/Email Address/Telephone No. Pages
Duration
No.
001 OK [SERVICE ] SERVICE DEPT
001/001
00:01:30
002 OK [SALES DEPT ] SERVICE DEPT 001/001 00:01:25
003 407 [ACCOUNTING ] SERVICE DEPT
000/001 00:01:45
004 Busy 021 111 1234 000/001 00:00:00
- PANASONIC -
************
DP-XXXX ************** - HEAD OFFICE - ****** - 201 555 1212 - *******
THE SLEREXE COMPANY LIMITED
SAPORS LANE . BOOLE . DORSET . BH 25 8 ER
TELEPHONE BOOLE (945 13) 51617 . TELEX 123456
Our Ref. 350/PJC/EAC
18th January, 1972.
Dr. P.N.Cundall,
Mining Surveys Ltd.,
Holroyd Road
P.J. CROSS
Group Leader - facsimile Research
tions of print density
cause the photocell to generate an analogous electrical video signal.
this signal is used to modulate a carrier, which is transmitted to
remote destination over a radio or cable communications link.
At the remote terminal, demodulation reconstructs the video
signal, white is used to modulate the density of print produced by a
printing device. This device is scanning in a raster scan synchronised
with that at the transmitting terminal. As a result, a facsimile
copy of the subject document is produced.
Probably you have used for this facility in your organisation.
Yours sincerely,
Continued on the next page...