Filter
Top Products
152
Chapter 5 Internet Fax
Adding End Receiving Stations for Relayed Transmission
You can add end receiving stations to the Address Book by the following procedure.
zIf broadcasting to multiple end receiving stations is required, use group dialling (see page 183).
zThe Function Parameter “140 LAN RLY XMT Request” (Fax/Email Settings > Fax Parameters) must have
been set to “Valid” to have a LAN Relayed transmission request pre-programmed in the Address Book. For
more operational details, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters)
of provided CD-ROM.
zFor instructions on registration in the Address Book, refer to Address Book (see page 172).
zYou cannot use the address registered for Relayed transmission for Confidential communication, Sub-address
communication, and Password transmission. Register an address without a relayed station (see page 173).
1
Press the Function key.
2
Select “Fax/Email Settings”.
3
Select “00 Address Book”.
4
Select “01 Add Telephone Number”.
5
Enter a fax number, and then select
“OK”.
zSelect “Clear” to delete the fax number one
digit at a time.
zFor instructions on how to enter fax
numbers, refer to Manual Dialling (see
page 16).