Filter
Top Products
48
Making Copies
Other Features
■ Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive and Image
Memory (See page 65) to be installed)
1st job
1st job
2nd job
Reserve
Copy
2nd job
1st job
or
Select Function
■ Energy Saver (Power Save Mode, Sleep/Shutdown Mode)
■ Skyshot Mode
Skyshot allows copying a manuscript without generating dark borders even if the platen cover or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance.
Digital Skyshot Mode
NORMAL
Default setting (usually select this mode).
QUALITY
∗∗∗∗
∗∗∗∗
∗∗
For better definition, select the Quality mode.
The default setting of Digital Skyshot Mode is
“NORMAL”. In this setting, the unit scans once.
If there are black areas around the borders in
the copies, set the Digital Skyshot Mode to
“QUALITY” to soften the dark borders. In this
setting, the unit scans twice.
(See page 52)
Opening the ADF
Number of Copies
(Max. 999)
NOTE
∗
Sleep Mode/Shutdown Mode and entering timer can be selected by the key operator.
(See page 55)
∗∗
When copying the Quality mode combined with 1 2, BOOK 2, 2PAGE, N in 1, “Quality”
mode will be changed to “Normal” mode.
● An incorrect exposure may occur when there is a black line at the edge of the original or an
image which the copier interprets as a black pattern in the skyshot mode.
These modes save power while the copier is not in use.
Power Save Mode
Enter
Sleep/Shutdown Mode
∗∗
∗∗
∗
Automatically enters the Sleep/
Shutdown Mode after 15 minutes
from the last copy job.
To clear
or
Modes Power Consumption Warm Up Time
Normal Operation Approx. 140 Wh N/A
Power Save Approx. 28 Wh Approx. 30 sec.
Sleep Approx. 18 Wh 35 sec.
Shutdown Approx. 3 Wh 35 sec.
1
2
1 2
21
The machine will not go into Sleep/Shutdown Mode when the Weekly
Timer is selected.
Indicator
Flash: Power Save Mode
Light: Sleep/Shutdown Mode