Filter
Top Products
56
Function
■ General Settings
Screen
No.
20 Date Time Setting Sets the registered date and time.
●Month, Day, Year, Time
21 Weekly Timer Sets the weekly On/Off timer. Off
●Off, On (Set)
22 Daylight Time Sets the daylight time. Yes
●No, Yes
23 DHCP Default Sets the DHCP. Yes
●No, Yes
24 TCP/IP Address Sets user IP address.
∗∗
0. 0. 0. 0
●3 digits x 4
25 TCP/IP Subnet Mask Sets the subnet mask.
∗∗
0. 0. 0. 0
●3 digits x 4
26 TCP/IP Default Gateway Sets the gateway address.
∗∗
0. 0. 0. 0
●3 digits x 4
27 DNS Server Address Sets the DNS server.
∗∗
Yes
●No, Yes
28 MAC Address Indicates the MAC address.
29 Hard Disk Format
∗
Selects the HDD format Stop
●Stop, Start
30 Hard Disk Error Check Selects the HDD error check Stop
●Stop, Start
31 Address Book Group ID Inputs address book group ID. 0
●0 ~ 99
32 Tandem User Parameter Inputs the Tandem User Parameter.
33 Community Name (1) Selects to change the SNMP of Community public
Name (1).
∗∗
●Enables read only.
34 Community Name (2) Selects to change the SNMP of Community public
Name (2).
∗∗
●Enables read/write.
35 Device Name Input the device name when required.
∗∗
Panasonic
(For Status Monitor/EtherTalk Machine Name)
DP-2310 or DP-3010
36 Device Location Input the device location when required.
∗∗
(For Status Monitor)
Modes Function
Initial
Setting
05/08
06/08
07/08
08/08
NOTE
●The Key Operator ID Code is required before any changes can be made to items on this
page.
∗
Not required in copying mode, but needed when installing options with advanced functions
(See page 65).
∗∗
When functions No. 24 to 27 and No. 33 to 36 are set, cycle the power by turning the Power
Switch on the Left Side of the machine OFF and ON.
For Key Operator