Filter
Top Products
8
Getting To Know Your Machine
Precautions
Toner and Paper
Handling
■ Do not look directly at the exposure lamp when copying.
■ Do not turn the power switches Off or open the front cover/right cover during copying.
● Do not drop paper clips or other metal objects into the copier.
■ If you are not going to use the copier for long periods of time, turn OFF
the Power Switch on the Left Side of the machine and wait 10 seconds
then, turn OFF the Main Power Switch on the Back Side of the machine.
■ Energy Save Mode Notice
● If the energy save mode is set to Shutdown mode, the following
functions will not work while the unit is in this mode.
When using the following functions, we recommend that you leave
the energy save mode in the initial factory default setting (Sleep).
(See page 55)
1) Data Reception Function while Tandem/Remote Copying is being used
2) Printer Function (USB Local and Network Connections)
■ Inner Tray Notice
● Under normal operation, it is not necessary to remove this Inner
Tray. If this tray is removed, lift up the Paper Holder while
reinstalling the tray to prevent damaging it.
■ Store toner, drum and paper in cool areas with low humidity.
● Use high quality 16 - 24 lb (Sheet Bypass: 15 - 35 lb) paper.
● For optimum performance, it is recommended that only Panasonic Brand supplies are used
in the copier.
● Do not unseal the toner bottle unless you are ready to use it.
● Certain types of transparency film may not be compatible and may damage your machine.
Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.
(Panasonic has tested “3M PP2500” transparency film and found it to be compatible.)
Installation
■ The copier should not be installed in areas with the following conditions:
● Extremely high or low temperature and humidity.
Ambient conditions
Temperature: 50 – 86°F
Relative humidity: 30 – 80 %
● Where temperature and humidity can change rapidly, causing condensation.
● Direct exposure to sunlight.
● Directly in the air conditioning flow.
● In areas of high dust concentration.
● In areas of poor ventilation.
● In areas with chemical fume concentration.
● In areas with extreme vibration.
● With unstable or uneven conditions (floors, etc.).
Inner Tray Paper Holder