Filter
Top Products
Sending Documents via LAN
128
You can store the document(s) into memory and then send to multiple stations (up to 270 addresses) via
LAN.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
NOTE
1. If your machine sounds an alarm (pi-pi-pi) in Step 2 above, this indicates that the Dialer is Full
(more than 70 full email addresses are entered or 70 transmission reservations including G3
communication have been already reserved).
2. If the transmission cannot be completed for any reason, the email may be returned
undelivered; otherwise no reply will be printed.
3. The unit will accept a combination of email addresses and PSTN dialing numbers.
4. The “QUICK MEMORY TRANSMISSION” is disable if multipe stations are set.
Multi Email Station Addressing (Broadcasting)
1
Set document(s).
You can temporarily change the transmission setting.
2
Enter email addresses by any combination of the following methods:
• Manual Email Addressing, press after each station is entered. (Up to
70 stations)
• Address Book Email Addressing.
(Up to 200 stations)
Ex:
3
The document(s) begin to store into memory with a file number.
Then starts connecting to the LAN immediately after storing the first page.
(See note 4)
While sending the document(s) via LAN, the remaining page(s) continue to
store into memory.
OK
PANASONIC
Memory Transmit STN(s):001
TO: PANASONIC
abc@panasonic.com
PANASONIC
QUALITY DEPT