Filter
Top Products
Customizing Your Machine
195
Fax Parameter Table
Setting Your
Machine
NOTE
1. The factory standard and the current settings are also shown on the Fax Parameter List
printout. To print the Fax Parameter List, see page 206.
170 SMTP Authentication *Invalid If you transmit to the SMTP server, user name and password are used
for authentication. Selecting "Valid" allows you to set up the user name
and password.
Valid
171 POP Before SMTP *Invalid If you transmit to the SMTP server, POP user name and POP password
are used for authentication.
Valid
172 Direct IFax XMT *Invalid Selecting whether to be prompted during Address Book registration if
the station you are programming is to receive Internet Fax directly
without going through a Mail Server.
Valid
173 Delivery Notice *Off Setting the home position of whether to request a Message Disposition
Notification (MDN) for a delivery processing confirmation indicating that
the message (email) was read, when sending an email/Internet Fax.
This setting will be the default value for the
.
On
174 APOP Authentication *Invalid This parameter allows you to encrypt the protocol for the POP password
security when connecting with the POP server.
Valid
177 XMT File Format
(Only for DP2310/3010/
3520/4520/6020)
*TIFF Selecting whether the document(s) are converted into a TIFF-F or PDF
format when sending an Internet Fax. (The setting can be temporarily
changed when sending an Internet Fax.)
Note: PDF file is only available if sending the document(s) to a PC
(Network Scanning).
PDF
182 Send Comm. JNL *Print Selecting whether the Communication Jornal is printed, emailed or both.
Print :Prints
Email : Emailed to the address selected in the Sender Selection
(See page 145).
Both : Prints and Emailed
Email
Both
* = Factory default setting
No. Parameter Setting Comments
MODE SETTING
SELECT MODE